Why the device status doesn't synchronize with the status displayed on the APP?

1. If the device is controlled by a manual switch, the device may not be synchronized at the same time. It is recommended that you can open the App and the device status will be updated after operating.

2. If the device is controlled by a manual switch, the device may not be synchronized at the same time. It is recommended that you can open the App and the device status will be updated after operating.

3. If it is a lamp that has no switch itself (and the switch in the home is not a smart switch, the scene linkage is not set), such devices need to be connected to the network, and the physical switch of the lamp needs to be turned on, and then the APP can be used to control the lamp. However, when the power is turned off, the light and the APP lose contact. At this time, the light becomes an ordinary light. When the call is made again, the physical switch state before the light is "on", so the light is on. Under normal circumstances, after power-on, the APP status will automatically change to "on" state.